Filter module USB 3.1

Produkt­details

Eigenschaften

Filter module USB 3.1

The filter module USB 3.1 with integrated ESD protection and EMI filter has been developed e.g. for installation in MTS shielded boxes. It supports “Super Speed (Plus), High Speed and Full Speed” and is suitable for testing smartphones, tablets or similar devices with high data rates under shielded conditions. Passive filter elements are included in the scope of delivery.
The connections are USB 3.0 type A sockets.

There is also no need to attach several components and lay fibre optic cables, as only the one filter module needs to be mounted on the chamber’s feed-through plate.

With dimensions of 71 mm x 33 mm x 31 mm (LxWxH), a FIL-USB-3.1-A filter module is not only smaller than competitors’ products, but it is also fully backwards compatible with the older USB versions USB 2.0 and USB 1.0. The shielding is 80 dB min. up to 6 GHz.

29400_Spec 185

Figure may differ from the original.

Description

Description

  • Supported USB standards: USB 1.x, USB 2.0, USB 3.0, USB 3.1
  • Data rates @USB 1.x: 12 Mbit/s typ. (1.5 MB/s)
  • Data rates @USB 2.0: 320 Mbit/s typ. (40 MB/s)
  • Data rates @USB 3.0: 3000 Mbit/s typ. (375 MB/s)
  • Data rates @USB 3.1: 6000 Mbit/s typ. (750 MB/s)
  • Supported current rating on the USB interfaces: 1.5 A typ.
  • Voltage: 16 V DC max.
  • ESD protection (IEC-61000-4-2): ±15 kV (air), ±8 kV (contact)
  • EMI filter: Common mode chokes
  • Shielding efficiency 80 dBm min.