MTS Systemtechnik GmbH
- Gewerbepark Ost 8
- 86690 Mertingen
- Germany
- Phone: +49 (0) 9078 91294-0
- Fax: +49 (0) 9078 91294-70
- info@mts-systemtechnik.de
The feedthrough Filter Module USB 3.2 with integrated ESD protection and EMI filter is designed to be built in at MTS Shielding Boxes series MSB. It supports Super Speed (Plus, up to 20 Gbit/s), High Speed (up to 480 Mbit/s) and is suitable for testing mobiles, tablets or similar devices with high data rates under shielded conditions.
Passive filter elements are included and the module can handle power delivery (PD) up to 100 Watts.
The connectors are USB Type-C receptacles.
There is also no need to attach several components and lay fibre optic cables, as only the one filter module needs to be mounted on the chamber’s feed-through plate.
With dimensions of 71 mm x 27.8 mm x 31 mm (LxWxH), a FIL-USB-3.2-C-PD filter module is not only smaller than competitors’ products, but it is also fully backwards compatible with the older USB versions. The shielding is 80 dB min. up to 6 GHz.
Figure may differ from the original.
The RJ45 filter module with integrated EMI filter has been developed e.g. for installation in MTS shielding boxes. It supports “Ethernet, Fast Ethernet and Gigabit Ethernet” and is suitable for testing smartphones, tablets or similar devices with high data rates under shielded conditions.
PoE power pass compatible and passive filter elements are included.
The connections are RJ45 CAT 5 sockets.
There is also no need to mount multiple components and run LAN cables, as only the one filter module needs to be mounted on the chamber’s feed-through plate.
With dimensions of 71 mm x 41.75 mm x 31 mm (LxWxH), a FIL-RJ45 filter module is not only smaller than competitors’ products, but it is also fully downward compatible with 10 and 100 Ethernet. The shielding is 80 dB min. up to 6 GHz.
Figure may differ from the original.
Presentation “RF Emulation for Telecommunications application – Ready for new technologies”
The PAH-9G/95-TTL programmable attenuator was developed for use in the frequency range between 10 MHz and 9000 MHz and can therefore be used for all common mobile radio frequencies such as GSM, DECT, UMTS, ZigBee, Bluetooth, Wi-Fi, all LTE frequency bands, GPS and UWB up to 9 GHz. It can be used in satellite communication as well as in broadcasting from FM.
Due to the uninterrupted adjustment, the possibility to change the attenuation in 0.5 dB steps and the input power of +34 dBm, the digital attenuator is suitable for almost any test scenario.
Integrated DC protection measures make external components in the signal path obsolete. A compact housing made of milled aluminum makes the bidirectional attenuator an ideal solution where space is limited.
Picture may differ from the original.
MTS radio field emulation for military communication – Brings reality into your test area
The LT2-5xxP-8G is a ultra-wideband 2-way 0° high-power divider/combiner which provides up to 40 W power handling as a divider.
The coverage from 500 MHz to 8 GHz supports a wide range of applications including GSM, Bluetooth, Wi-Fi 7 and all LTE+ as well as 5G frequency bands.
Its unique design maintains a very low insertion loss, minimizing power dissipation and excellent signal power transmission from input to output.
Data Sheet_LT2-SMA-8G 296
Data Sheet_LT2-N-8G 303
S-Parameters_LT2-SMA-8G 72
S-Parameters_LT2-N-8G 73
Figure may differ from the original.
Query requirement for relay devices and systems (Air Interface Adapter, Matirx, etc.)
Query requirement for relay switching units (KRE)
Query requirement for shielding boxes
The PAH-3G/122-TTL programmable attenuator was developed for use in the frequency range between 10 MHz and 3000 MHz and can therefore be used for all common mobile radio frequencies such as GSM, DECT, UMTS, Bluetooth, Wi-Fi and all LTE frequency bands up to 3 GHz. It can be used in satellite communication as well as in broadcasting from FM.
Due to the uninterrupted adjustment, the possibility to change the attenuation in 0.5 dB steps and the input power of +31 dBm, the digital attenuator is suitable for almost any test scenario.
Integrated DC protection measures make external components in the signal path obsolete. A compact housing made of milled aluminum makes the bidirectional attenuator an ideal solution where space is limited.
29854_PAH-3G-122-TTL_SPEC 300
S-Parameters_PAH-3G-122-TTL 631
Also available in version PAH-6G-122-TTL (10MHz – 6000MHz).
Picture may differ from the original.
The PAH-6G/122-TTL programmable attenuator was developed for use in the frequency range between 10 MHz and 6000 MHz and can therefore be used for all common mobile radio frequencies such as GSM, DECT, UMTS, Bluetooth, Wi-Fi and all LTE frequency bands up to 6 GHz. It can be used in satellite communication as well as in broadcasting from FM.
Due to the uninterrupted adjustment, the possibility to change the attenuation in 0.5 dB steps and the input power of +31 dBm, the digital attenuator is suitable for almost any test scenario.
Integrated DC protection measures make external components in the signal path obsolete. A compact housing made of milled aluminum makes the bidirectional attenuator an ideal solution where space is limited.
29850_PAH-6G-122-TTL_SPEC 300
S-Parameters_PAH-6G-122-TTL 1.237
Also available in version PAH-3G-122-TTL (10MHz – 3000MHz).
Picture may differ from the original.
MTS rack solutions
The sensitivity of mobile devices increases the last year dramatically. 4G or 5G devices could detect till -127dBm, NB IOT applications even more till -145dBm. To test these technologies under defined conditions very high RF shielding level are necessary. MTS rack systems series SRK is a solution which offer about 120 – 140 dB.
The key features are a box in shell system, filtered interfaces adjusted rf cabling inclusive and the complete installation in and onside.
Figure may differ from the original.
Another example of our numerous customised shielding boxes is the model MSB-0074-FLABS-FAN with 19 inch x 18 HU, which has been developed for the rack mounting. The compact portable EMC shielded chamber is opened from the front side by the easy one-hand mechanism and offers plenty of space for specimens of all kinds.
This rack is designed for the frequency range from 700 MHz to 6000 MHz and shields electromagnetic disturbances from the environment. In addition to many different standard interfaces, the 19″ shielding box also has brackets for pRRU antennas and a “shelf”.
Figure may differ from the original.
Whitepaper Switch Matrix Systems from MTS Systemtechnik GmbH
Whitepaper MTS Air Interface Emulation / Air Interface Adapter – AIAD, SCF & FSAN
Whitepaper MTS Shielding Boxes, Series MSB
Whitepaper SIMCard Switching Test Solution
Whitepaper Mechanical Services
Whitepaper Modular Switch Unit – KRE, KVE, MX & KRM
The RJ45 filter module with integrated EMI filter has been developed e.g. for installation in MTS shielding boxes. It supports “Ethernet, Fast Ethernet and Gigabit Ethernet” and is suitable for testing smartphones, tablets or similar devices with high data rates under shielded conditions.
PoE power pass compatible and passive filter elements are included.
The connections are RJ45 CAT 5 sockets.
There is also no need to mount multiple components and run LAN cables, as only the one filter module needs to be mounted on the chamber’s feed-through plate.
With dimensions of 71 mm x 41.75 mm x 31 mm (LxWxH), a FIL-RJ45 filter module is not only smaller than competitors’ products, but it is also fully downward compatible with 10 and 100 Ethernet. The shielding is 80 dB min. up to 6 GHz.
Figure may differ from the original.
The filter module USB 3.1 with integrated ESD protection and EMI filter has been developed e.g. for installation in MTS shielded boxes. It supports “Super Speed (Plus), High Speed and Full Speed” and is suitable for testing smartphones, tablets or similar devices with high data rates under shielded conditions. Passive filter elements are included in the scope of delivery.
The connections are USB 3.0 type A sockets.
There is also no need to attach several components and lay fibre optic cables, as only the one filter module needs to be mounted on the chamber’s feed-through plate.
With dimensions of 71 mm x 33 mm x 31 mm (LxWxH), a FIL-USB-3.1-A filter module is not only smaller than competitors’ products, but it is also fully backwards compatible with the older USB versions USB 2.0 and USB 1.0. The shielding is 80 dB min. up to 6 GHz.
Figure may differ from the original.
The PAH-8G/95-TTL programmable attenuator was developed for use in the frequency range between 10 MHz and 8000 MHz and can therefore be used for all common mobile radio frequencies such as GSM, DECT, UMTS, Bluetooth, Wi-Fi and all LTE frequency bands up to 8 GHz. It can be used in satellite communication as well as in broadcasting from FM.
Due to the uninterrupted adjustment, the possibility to change the attenuation in 0.5 dB steps and the input power of +34 dBm, the digital attenuator is suitable for almost any test scenario.
Integrated DC protection measures make external components in the signal path obsolete. A compact housing made of milled aluminum makes the bidirectional attenuator an ideal solution where space is limited.
29250_PAH-8G-95-TTL_SPEC 307
S-Parameters_PAH-8G-95-TTL 1.455
Picture may differ from the original.
The semiconductor switch HLS2-6G/UHI-TTL0 was developed for wear-free switching in the frequency range between 100 MHz and 6000 MHz.
Due to its high bandwidth the semiconductor switch is suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The broadband switch provides low insertion loss, exceptional VSWR and ultra-high isolation.
The HLS2-6G/UHI-TTL0 is available with SMA connectors.
27540_Spec_HLS2-6G-UHI-TTL 222
S-Parameters_HLS2-6G-TTL 133
Figure may differ from the original.
The MX-8/8-FFO-6G is an RF-Matrix made of dividers and semiconductor switches. The principle is full fan out. It can be used for several applications, f.e.:
– Test automation in the mobile communication area
– Remote switching of measuring instruments and test equipment
– Permanently change of components such as amplifiers, filters, attenuators, etc. without having to rewire
At the MX-8/8-FFO-6G all of the outputs can be connected to maximum one input simultaneously. This can be the same input for all outputs. The configuration is 8 inputs and 8 outputs. In combination with attenuators, splitters and other modules the usability can be extended.
The standard coupling unit SCF-0350-4G is available in the frequency range from 400 MHz upto 4000 MHz. It emulates the air interface between GSM/DCS/DCN/UMTS/LTE or DECT mobile devices and the belonging base stations. According to this the handover can be tested between the base stations in the laboratory. The emulation test systems has connections for 6 base stations and 3 mobile devices.The attenuation of each attenuator is adjustable from 0 dB upto 95 dB in 1 dB steps.
Figure may differ from the original.
MTS Systemtechnik GmbH has developed a compact EMC screened rack mount chassis, to fulfil multipurpose requirements. The stable construction of the Shielding Box Unit series MSBU is predestined for industrial long term tests. To offer a maximum of flexibility and usability the Shielding Box Unit is built with three independent shielding cabinets, each with RF- and communication interfaces.
Therefore it is possible to use the unit for different tests or by different users at the same time.
The operation of the test samples can be done by using the included communication interfaces independently for each chamber.
Figure may differ from the original.
RF signals will be equally splitted and respectively combined by using the Power Dividers of series LT6-5xxP-6G. The Wilkinson Power Dividers were developed for the use in the frequency range from 500 MHz – 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The component is available as 4-way splitter with SMA (LT6-544P-6G) or N (LT6-588P-6G) connectors.
The broadband splitters of series LT provide low insertion loss, exceptional VSWR and excellent phase and amplitude balance.
Data Sheet_LT6-SMA-6G 213
S-Parameters_LT6-SMA-6G 176
Figure may differ from the original.
The Coaxial Relay RU2-56G41-C-S1 consists of two SPDT relays in series. This enables the possibility to open the relay in order to switch off the RF signal. It was especially designed to work between DC and 6000 MHz.
This switch fits for most of mobile applications (GSM, DECT, UMTS, LTE, Bluetooth, WiFi etc.) and for satellite communication (L-Band).
EN-SPEC-RU2-56G41-C–S1-28742 235
Figure may differ from the original.
With our shielding box MSB-0604 specimens can be tested without electromagnetic disturbances from the environment in temperature-/climatic chambers.
A built-in 230 V fan, shielded with a honeycomb vent, transports the temperature of the chamber reliably in the EMC box. For better air circulation, this EMC box is provided with two further shielded vent panels (honeycomb vents).
The shielding housing is designed for the frequency range from 500 MHz to 6000 MHz and has several different standard interfaces.
Shielding Boxes with other dimensions can be designed according to customers individual requirements Figure may differ from the original.
The Air Interface Adapter series AIAD is our most flexible solution for air interface emulation. With the AIAD it is possible to emulate the in- and outputs according to the demands of the customer. The design of the shown unit is divided into 8 groups. Every group allows program controlled attenuation of 2 input to 1 output signals at the same time. The function is carried out by dividers, attenuators and delay lines.
With the MTS AIAD you can emulate air interfaces for all imaginable scenarios. To avoid the influence from the live-net, the signals can be connected with cables directly from the different signal sources, as for example GSM, UMTS or LTE base stations or signal generators etc. over the MTS AIAD to mobile devices.
The MX-8×2/2+2×8/8-6G is an RF-Matrix made of three matrices with dividers and semiconductor switches. It can be used for several applications, f.e.:
At the MX-8×2/2+2×8/8-6G all of the outputs can be connected to maximum one input simultaneously. This can be the same input for
up to eight outputs. The configuration is 16 inputs and 16 outputs. In combination with attenuators, splitters and other modules the usability can be extended.
The operating frequency range of the switch covers 500 Mhz to 6000 Mhz. It is perfect for use in LTE and 5G test applications.
It automates test labs by replacing cumbersome patch panels and can be controlled easily via RS-232, LAN or a web control (on request) interface.
Figure may differ from the original.
Another example of our numerous customized shielding boxes is the model MSBU-3CA-HI, which was developed with 19 inch x 3 HU for cabinet installation. The highly isolating RF shielding chamber is opened from the front side by means of quick-release screws and offers space for mobile devices (in 3 cabinets).
The EMC shielding housing is designed for the frequency range from 500 MHz to 6000 MHz and shields electromagnetic interference from the environment. Shielding effectiveness >90 dB!
Picture may differ from the original.
Another example of our numerous customised shielding boxes is the model MSB-0053 with 19 inch x 12 HU, which has been developed for the rack mounting. The compact portable EMC shielded chamber is opened from the front side by the easy one-hand mechanism and offers plenty of space for specimens of all kinds.
This rack is designed for the frequency range from 500 MHz to 4500 MHz and shields electromagnetic disturbances from the environment. Besides many standard interfaces the 19 inch shielding box has fiber optic connections and one door interlock in addition.
Figure may differ from the original.
The 3-dB hybrid couplers (180°) of this series are designed for operation in the frequency ranges of 1000 MHz – 1500 MHz, 1100 MHz – 1700 MHz, 1500 MHz – 2150 MHz and 2150 MHz – 3000 MHz.
They provide two equal amplitude in-phase signals when fed from its sum port (Σ) and two equal amplitude 180° out-of-phase signals when fed from its difference port (Δ).
The multisection stripline design exhibits very good flatness and VSWR at all ports.
28030_Spec_RK3-180-544P-1.5G 296
S-Parameters_RK3-180-544P-1.5G 70
30112_Spec_RK3-180-544P-1.7G 234
S-Parameters_RK3-180-544P-1.7G 71
28755_Spec_RK3-180-544P-2.15G 248
S-Parameters_RK3-180-544P-2.15G 71
28756_Spec_RK3-180-544P-3G 256
S-Parameters_RK3-180-544P-3G 69
Figure may differ from the original.
The Air Interface Adapter series AIAD is our most flexible solution for air interface emulation. With the AIAD it is possible to emulate the in- and outputs according to the demands of the customer. The design of the shown unit allows program controlled attenuation and delay of 8 input to 8 output signals at the same time. The function is carried out by dividers, attenuators and delay lines.
With the MTS AIAD you can emulate air interfaces for all imaginable scenarios. To avoid the influence from the live-net, the signals can be connected with cables directly from the different signal sources, as for example GSM, UMTS or LTE base stations or signal generators etc. over the MTS AIAD to mobile devices.
The DL1-544-1600ps from MTS Systemtechnik is designed for operations between 500 MHz and 4000 MHz. The delay of this unit is adjustable, continuously and without breaks from 0 to 1600 ps in 5 / 10 ps steps. The interchangeable in- and output ports are protected by internal blocking capacitors.
This delay line can be used very flexible because of its compact design and the controlling via TTL interface (8 bit parallel).
Figure may differ from the original.
With our shielding box MSB-0402 test specimens, e.g. IoT water meters, can be tested without electromagnetic interference from the environment.
Smart metering water meters, for example, can be connected to the built-in brass tubes on the right and left of the side walls.
The shielding box is designed for the frequency range from 500 MHz to 6000 MHz and, in addition to many different standard interfaces, also has a LAN interface and is lined with absorbers.
The RKE-Yx3-5xxP-6G series 3 dB hybrid coupler unit was developed for the frequency range from 380 MHz to 6000 MHz. These coaxial hybrid couplers are therefore ideally suited for common mobile radio standards such as GSM, UMTS and LTE as well as Bluetooth, DECT and WLAN. Due to the lower frequency range, this hybrid coupler unit can also be used for the TETRA range.
Due to the broadband stripline design, very good specifications are achieved at all connections.
The hybrid couplers are mounted in an RF-tight housing and are available with SMA or N sockets.
Figure may differ from the original.
The MX-20/4-HLS-FFO-6G from MTS Systemtechnik GmbH is a passive full fan-out switch matrix which allows any of the 20 inputs to be routed to any or all outputs (4 Output).
The operating frequency range of the switch covers 500 Mhz to 6000 Mhz. It is perfect for use in LTE and 5G test applications.
It automates test labs by replacing cumbersome patch panels and can be controlled easily via RS-232, LAN or a web control (on request) interface.
Figure may differ from the original.
MTS Systemtechnik GmbH has developed a compact EMC screened rack mount chassis, to fulfil multipurpose requirements. The stable construction of the Shielding Box Unit series MSBU is predestined for industrial long term tests. To offer a maximum of flexibility and usability the Shielding Box Unit is built with three independent shielding cabinets, each with RF- and communication interfaces.
Therefore it is possible to use the unit for different tests or by different users at the same time.
The operation of the test samples can be done by using the included communication interfaces independently for each chamber.
Figure may differ from the original.
With the AIAD-8+-6G-190dB Air Interface Adapter, tests can be performed in the range from 500 MHz to 6000 MHz. Ring system with 8 coupled inputs and outputs by 190 dB attenuators and 2 source connections per port (2x 8 ports). The core of the AIAD-8+ consists of a fully meshed network. This allows connections from RF ports to all other RF ports via separate signal paths. Programmable attenuators in each path emulate the signal attenuation to any neighboring cells.
Modern radio technologies such as IoT, TETRA, Smart Metering, MIMO, Car to Car, Military Communication and many more require ever new test solutions. Not so much the frequency range, but the classical structure in mobile communication from the sender side to the receiver side has been abolished. Modern communication takes place not only vertically, but also horizontally. This enables a direct connection between different terminals without a network infrastructure. Thus applications, products or terminal devices of this type partly generate their own networks, expand the network or forward information from neighboring network subscribers.
Figure may differ from the original.
The 3 dB hybrid coupler of the RK3-5xxP-6G-S1 series was developed for the frequency range from 380 MHz to 6000 MHz. This coaxial hybrid coupler is therefore ideally suited for common mobile radio standards such as GSM, UMTS and LTE as well as Bluetooth, DECT and WLAN. Due to the lower frequency range, this hybrid coupler can also be used for the TETRA range.
Due to the multi-section stripline design very good specifications will be achieved at all ports.
The Hybrid Couplers have a RF-tight housing and are available with SMA or N connectors.
27670_Spec_RK3-544P-6G-S1 248
RK3-544P-6G-S1 310
Figure may differ from the original.
The Standard Coupling Unit SCF-0600-6G is available in the frequency range from 700 MHz up to 6000 MHz.
It emulates the air interface between GSM/UMTS/LTE or Wi-Fi mobile devices and the belonging base stations (Nodes). According to this the handover can be tested between the base stations in the laboratory.
The emulation test system has connections for 2x 6 inputs (Nodes) and 2x 5 outputs (OUT Nodes) as well as 2x 3 additional hybrid couplers. The attenuation of each attenuator is adjustable from 0 dB up to 95 dB in 1 dB steps.
Figure may differ from the original.
The semiconductor switch HLS4-6G/UHI-TTL was developed for wear-free switching in the frequency range between 100 MHz and 6000 MHz.
Due to its high bandwidth the semiconductor switch is suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The broadband switch provides low insertion loss, exceptional VSWR and ultra-high isolation.
The HLS4-6G/UHI-TTL is available with SMA connectors.
27824_Spec_HLS4-6G-UHI-TTL 311
Figure may differ from the original.
The semiconductor switch HLS8-6G/UHI-TTL0 was developed for wear-free switching in the frequency range between 100 MHz and 6000 MHz.
Due to its high bandwidth the semiconductor switch is suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The broadband switch provides low insertion loss, exceptional VSWR and ultra-high isolation.
The HLS8-6G/UHI-TTL0 is available with SMA connectors.
26581_Spec_HLS8-6G-UHI-TTL 252
S-Parameters_HLS8-6G-TTL 134
Figure may differ from the original.
The semiconductor switch HLS2-6G/TTL was developed for wear-free switching in the frequency range between 100 MHz and 6000 MHz.
Due to its high bandwidth the semiconductor switch is suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The broadband switch provides low insertion loss, exceptional VSWR and high isolation.
The HLS2-6G/TTL is available with SMA connectors.
Data Sheet_HLS2-6G-TTL
S-Parameters_HLS2-6G-TTL
Figure may differ from the original.
RF signals will be equally splitted and respectively combined by using the Power Dividers of series LT8-5xxP-6G. The Wilkinson Power Dividers were developed for the use in the frequency range from 500 MHz – 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The component is available as 8-way splitter with SMA (LT8-544P-6G) or N (LT8-588P-6G) connectors.
The broadband splitters of series LT provide low insertion loss, exceptional VSWR and excellent phase and amplitude balance.
Data Sheet_LT8-SMA-6G 229
S-Parameters_LT8-SMA-6G 1.480
Figure may differ from the original.
RF signals will be equally splitted and respectively combined by using the Power Dividers of series LT4-5xxP-6G. The Wilkinson Power Dividers were developed for the use in the frequency range from 500 MHz – 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The component is available as 4-way splitter with SMA (LT4-544P-6G) or N (LT4-588P-6G) connectors.
The broadband splitters of series LT provide low insertion loss, exceptional VSWR and excellent phase and amplitude balance.
Data Sheet_LT4-SMA-6G 327
Data Sheet_LT4-N-6G 268
S-Parameters_LT4-SMA-6G 480
S-Parameters_LT4-N-6G 480
Figure may differ from the original.
RF signals will be equally splitted and respectively combined by using the Power Dividers of series LT4-544P-6G-S1. The Wilkinson Power Dividers had been developed for the use in the frequency range from 500 MHz – 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The component is available as 4-way splitter with SMA (LT4-544P-6G-S1) connectors.
The broadband splitters of series LT provide low insertion loss, exceptional VSWR and excellent phase and amplitude balance.
Data Sheet_LT4-N-6G 140
Data Sheet_LT4-SMA-6G 140
S-Parameters_LT4-N-6G 140
S-Parameters_LT4-SMA-6G 140
Figure may differ from the original.
RF signals will be equally splitted and respectively combined by using the Power Dividers of series LT2-5xxP-6G. The Wilkinson Power Dividers were developed for the use in the frequency range from 500 MHz – 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT, Wi-Fi and WiMAX.
The component is available as 2-way splitter with SMA (LT2-544P-6G) or N (LT2-588P-6G) connectors.
The broadband splitters of series LT provide low insertion loss, exceptional VSWR and excellent phase and amplitude balance.
Data Sheet_LT2-SMA-6G 345
Data Sheet_LT2-N-6G 346
S-Parameters_LT2-SMA-6G 181
S-Parameters_LT2-N-6G 181
Figure may differ from the original.
The PAH-6G/95-TTL programmable attenuator was developed for use in the frequency range between 50 MHz and 6000 MHz and can therefore be used for all common mobile radio frequencies such as GSM, DECT, UMTS, Bluetooth, Wi-Fi and all LTE frequency bands up to 6 GHz. It can be used in satellite communication as well as in broadcasting from FM.
Due to the uninterrupted adjustment, the possibility to change the attenuation in 0.25 / 0.5 dB steps and the input power of +34 dBm, the digital attenuator is suitable for almost any test scenario.
Integrated DC protection measures make external components in the signal path obsolete. A compact housing made of milled aluminum makes the bidirectional attenuator an ideal solution where space is limited.
25364_PAH-6G-95-TTL_SPEC 262
S-Parameters_PAH-6G-95-TTL 674
Picture may differ from the original.
With the Air Interface Adapter AIAD-16×1/3-LAN-4G tests in the frequency range from 400 MHz to 4000 MHz are possible. Due to the internal setup consisting of attenuators and power splitters 16 inputs and 48 outputs are implemented. The unit can be remote controlled via Ethernet or RS-232. An optional upgrade to 6 GHz is available. An optional upgrade to 0.5 / 0.25 dB-steps is available.
EN-SPEC-AIAD-16×1-3-LAN-4G-25472 1.007
Figure may differ from the original.
The Air Interface Adapter of type AIAD-2-2+ is designed for operation in the frequency range from 30 MHz to 3000 MHz. The internal setup of the device is carried out as a ring system with 2 inputs and 2 outputs with additional monitor ports for every path. Remote controlling of the unit is achieved by Ethernet or RS-232 interface.
Figure may differ from the original.
The shielding box MSB-0100 allows the user to work ergonomically in a sitting position. This EMC box shields electromagnetic disturbances from the environment and is suitable for frequencies between 500 MHz and 4000 MHz (GSM / UMTS / LTE / DECT / ZigBee / Bluetooth / WLAN etc.).
Furthermore the RF shielded box is equipped with different interfaces and a universal mobile phone attachment. The delivery package of this movable EMC screened room contains one closed cover and one cover with built-in flexible wire mesh. Thereby the operation of the shielded housing can be done from the outside without opening the cover.
Figure may differ from the original.
The Shielded Carrying Case MSCC-10 has been specifically designed for the forensic field. At the transportation of retained mobile devices a remote deletion of data is thereby prevented. Any kind of mobile phones can be transported and stored with it. The Shielded Carrying Case protects therefore easily and securely against data theft.
MTS Shielded Carrying Cases are ideal in the context of mobile phone forensics.
Micro Systemation (www.msab.com) is a specialist digital forensics company that manufactures tools to recover and analyse data from mobiles. The MSAB core product XRY can run on any Windows PC and will allow you to recover data from thousands of different cell phones, GPS devices & tablets.
Figure may differ from the original.
Our EMC shielding box MSB-044 is specially designed for the 19 inch rack mounting and is opened from the front side. The stable construction of the movable EMC screened room is predestined for high test appearance due to the easy, single-handed open-close function.
This EMC box shields electromagnetic disturbances from the environment and is suitable for frequencies between 500 MHz and 4500 MHz. Besides many standard interfaces, the 6 HU shielding box has an additional LAN interface.
Figure may differ from the original.
Obere Hauptstraße 30
D-79843 Löffingen
Phone: +49 76 54 90 10
Fax: +49 76 54 90 11 99
www.imscs.com
IMS Connector Systems is an international, technology driven company specializing in development and production of high frequency connections. The product range includes a large assortment of coaxial RF connectors, coaxial cable assemblies, RF test switches, RF antenna switches, test adapters and test assemblies, battery contacts as well as antennas for mobile devices.
Furthermore IMS Connector Systems has a strong research and development division and offers its customers customized RF solutions for individual applications.
IMS Connector Systems provides the innovative quick lock connectors QLS and SnapN, as well as, the newly developed medical RF connectors MedEasyLock. One of the key products for use in automotive applications is the connector series SMBA, which adheres to the FAKRA standard.
IMS Connector Systems offers you a full range of high quality standard coaxial connectors from one source. Based on these main standards, IMS has created innovative products which are unique in quality, flexibility and cost efficiency.
We deliver high-quality coaxial RF connectors and RF adapters in different types of the company IMS. The RF connectors and adapters are useable for many fields, like e.g. Telefommunication, Instrumentation, Industrial etc.
A quantity of established coaxial RF connectors and RF adapters are deliverable from stock of MTS.
A useful accessory for EMC measurements is the high pass Filter MTA-HPF-150, which has to get connected between the LISN and the measurement receiver input. The high pass filter suppresses disturbing signals below 150 kHz and allows reproducible measurements in the frequency range of 150 kHz to 30 MHz.
Figure may differ from the original.
The pulse limiter MTA-IMP-136 is based on semiconductor technology and offers fast limitation response with stable impedance values.
Figure may differ from the original.
To amplify low signal level in the EMC measurement technology and to increase the antenna ranges we have developed this low noise antenna preamplifier. The wide-band amplifier particularly has been designed for the MTS antenna MTA-300-3000 and can be connected to it directly.
Figure may differ from the original.
The logarithmical periodical wideband antenna model MTA-300-3000 fulfills the requirements of the CISPR 16-1-4 for the frequency range of 300 MHz to 3000 MHz. A tripod attachment is included in the delivery.
Figure may differ from the original.
Shielding Long-term monitoring of the behaviour of electronic equipment Consulting and support at the EMC-compliant development of PC-boards and products
Figure may differ from the original.
To make the additional built-in of connectors, etc. in enclosures easier, we offer you a number of screw taps. Screw taps of the series GBO are available for many different threads.
Figure may differ from the original.
Figure may differ from the original.
Cards guide bars and cassettes guide bars of the KF series are used for the incorporation of plug-in modules. These cards and cassettes guide bars are available in different depths and versions.
Figure may differ from the original.
Cover plates and bottom plates of the DB series are used in module racks of the EB series. These cover and bottom plates are available in three different versions:
– with ventilation slots, plastic coated, 1,5 mm thick
– as perforated cover sheet, 1 mm thick
– from full material, 2 mm thick
Figure may differ from the original.
Compatible for all module racks to DIN 41494 we deliver part front panels from aluminium in 3 HU and 6 HU. The part front panels can be delivered alternatively with or without grip.
Figure may differ from the original.
Standard 19″ front, rear and dummy panels from aluminium are available in 6 different sizes and can be delivered ex stock.
We do mechanical treatments on front and rear panels (drillings, millings, etc). 19″ front panels and 19″ rear panels are lettered by screenprint or gravure, e.g. with your company-logo.
Figure may differ from the original.
Figure may differ from the original.
Assembling, placements, soldering, wirings or measurements are possible according to customers requirements on request!
High-precision milling parts according to customers requirements
Figure may differ from the original.
Drillings, threads, milling, surface structure or treatments, lettering with screen printing or gravures, CAD drawings according to customers requirements
EN-SPEC-Mechanical-Treatment 38
Figure may differ from the original.
This profile enclosures are specially customised (we also produce unique pieces). You can choose the height of the KG cases between 1 HU, 2 HU, 3 HU or 4 HU. We offer this aluminium housings also with handles and pedestals.
Profile chassis of the KG series are used in data technology, the electronic, testing sets, engine constructions, etc.
Figure may differ from the original.
The corpus of this profile enclosures series G are made out of a square pipe. The aluminium housings are closed with different versions of covers/bottoms. The customer can assemble his special profile case. We deliver this robust boxes in different sizes, in short time and already in small quantities.
Figure may differ from the original.
All profile enclosures of PGS series are equipped with a flat bottom plate and an inlay cover, which are screwed in the housing. The PGS series are especially suitable to build-in RF-components, hybrid circuits and all kinds of small components.
Furthermore the stable cases are RF shielded extensively and this boxes are available in different sizes and according to customers wishes too.
Figure may differ from the original.
The corpus of the profile enclosures series SG are made out of a square pipe. The aluminium enclosures are closed with profile covers.
The profile cases are especially suitable for mounting powers supplies, control devices, switches or similar components. We deliver this stable profile boxes rapidly in different sizes.
Figure may differ from the original.
These cassettes fit in every 19“-module rack to DIN 41494, e.g. EB series under assistance of 4,4”-guide bars (KF2 series).
The distance of the guide slots for the circuit boards is 1 TE (5,08 mm).
Figure may differ from the original.
For an optimum shielding of high frequency elements we have the perfect solution: The FK series. These cassette enclosures are milled out of an aluminium block. Their size is designed in European standard card format for 19” plug-in module to DIN 41494 (part5).
Figure may differ from the original.
For the mounting of RF/microwave hybrid-thinfilm and stripline-circuits.
Ideal enclosures for RF hybrid circuits and LSI applications. All inside dimensions are in inches.
Figure may differ from the original.
The circuit board is screwed onto a circulating assembly web, so drill holes on the board are not necessary. The enclosures are locked with multible bolted, 2mm strong covers, which can be chosen as flush lock or as a mounting flange exceeding 10 mm on each side.
Figure may differ from the original.
Low weight enclosures milled out of a full aluminium block with rounded edges. Ideal for batteries or portable power supplies. The RG series is used in the medical industry, too.
Figure may differ from the original.
The enclosures are manufactured out of an aluminium tube and are closed at the ends with flat screw mounted covers on both sides.
They are especially suitable for building up attenuators or similar passive elements.
Figure may differ from the original.
Their characteristic is a circuit board mounted with clamping screws, so drillings are not necessary in the circuit board. These enclosures are locked with multible bolted, 2mm strong covers, which are alternatively flush locked or have a mounting flange exceeding 10 mm on each side.
Figure may differ from the original.
The 19“ Plug-In Module EGD6-450-KLAPPE-CN can be used to shield test samples, components or devices against electromagnetic disturbances from the environment.
DE-SPEC-EGD6-450-Klap-21465 1.510
Figure may differ from the original.
Also 19“ plug-in modules with RF shielding. In spite of the proved slot and spring principle, it is now possible to remove the cover and the bottom from the front and back panel without dismantling, if the parts are worked over. Special drillings and millings on request.
Figure may differ from the original.
An extremly stable and robust construction is reached by using thick extrusion type side-pieces (4mm).
Profile slots in the side panels enable the user to mount various components sideways, too. The side pieces can be exchanged fast and simple.
Figure may differ from the original.
19″ module racks, which are holding highest mechanical stability. A speciality are the full length extruded side-pieces profiles. These general-purposed module racks are suitable to mount assemblies based on the standard card format to DIN 41494 part 1-5.
Figure may differ from the original.
EN-SPEC-MKV-635-0971 103
EN-SPEC-MKV-635-969-03 111
EN-SPEC-MKV-745-0973 104
EN-SPEC-MKV-822-0200 396
EN-SPEC-MKV-835-0972 104
Figure may differ from the original.
EN-SPEC-MLV-557-0942-03 118
EN-SPEC-MLV-557-0942-02 112
EN-SPEC-MLV-647-0976-03 119
Figure may differ from the original.
Figure may differ from the original.
The power splitters of type RS had been developed for the frequency range from DC – 3000 MHz and covers thereforethe most important mobile communication standards as GSM, DECT, UMTS, Bluetooth und LTE. Additionally radio and videobroadcast signals can be combined resp. splitted with the resistive splitter.
The series RS splitter can be offered with either SMA- or N-connectors and with 2 – 7 ways. An operation as splitter and also as combiner is possible.
Data Sheet_RS6-SMA 208
Data Sheet_RS6-N 233
S-Parameters_RS6-N 503
S-Parameters_RS6-SMA 503
Figure may differ from the original.
The symmetrical 8way power divider LT8-544P-4G with SMA connectors (MTS no. 24135) and LT8-588P-4Gwith N connectors (MTS no. 24136) are designed to work between 400 MHz and 4000 MHz and covers for example GSM, DECT, UMTS, Bluetooth and LTE frequency bands.
All multi-section power splitters of the LT-series are Wilkinson dividers and can also be used as combiners. In addition to a max. input power of 10 W these low-attenuation eight-way splitters have an excellent VSWR and low insertion loss. A further advantage of our power dividers (combiners/splitters) are the exceptional amplitude and phase balance.
Data Sheet_LT8-SMA 310
Data Sheet_LT8-N 334
S-Parameters_LT8-N 1.070
S-Parameters_LT8-SMA 1.070
Figure may differ from the original.
The symmetrical 4-way power divider LT4-544P-4G with SMA connectors (MTS no. 23983) and LT4-588P-4G with N connectors (MTS no. 23984) are developed to work for the frequency range from 400 MHz to 4000 MHz. Therefore these well cascadable splitters are useable for telecom applications (e.g. GSM, DECT, UMTS, Bluetooth and all LTE frequency bands up to 4 GHz) as well as in the satellite communications (L-band) and are manufactured for the LTE range especially.
All multi-section power dividers of the LT-series are Wilkinson dividers and can also be used as combiners. In addition to a max. input power of 10 W these low-attenuation fourway splitters have an excellent VSWR and low insertion loss. A further advantage of our power dividers (combiners/splitters) are the exceptional amplitude and phase balance.
Data Sheet_LT4-SMA 200
Data Sheet_LT4-N 236
S-Parameters_LT4-SMA 348
S-Parameters_LT4-N 348
Figure may differ from the original.
The symmetrical 3-way power divider LT3-544P-4G with SMA connectors (MTS no. 24901) and LT3-588P-4G with N connectors (MTS no. 24915) are developed to work for the frequency range from 500 MHz to 4000 MHz. Therefore these well cascadable splitters are useable for telecom applications (e.g. GSM, DECT, UMTS, Bluetooth and all LTE frequency bands up to 4 GHz) as well as in the satellite communications (L-band) and are manufactured for the LTE range especially.
All multi-section power dividers of the LT-series are Wilkinson dividers and can also be used as combiners. In addition to a max. input power of 10 W these low-attenuation threeway splitters have an excellent VSWR and low insertion loss. A further advantage of our power dividers (combiners/splitters) are the exceptional amplitude and phase balance.
Data Sheet_LT3-SMA 233
Data Sheet_LT3-N 244
S-Parameters_LT3-SMA 226
S-Parameters_LT3-N 226
Figure may differ from the original.
The symmetrical 2-way power divider LT2-544P-4G with SMA connectors (MTS no. 23894) and LT2-588P-4G with N connectors (MTS no. 23895) are developed to work for the frequency range from 400 MHz to 4000 MHz. Therefore these well cascadable splitters are useable for telecom applications (e.g. GSM, DECT, UMTS, Bluetooth and all LTE frequency bands up to 4 GHz) as well as in the satellite communications (L-band) and are manufactured for the LTE range especially.
All multi-section power dividers of the LT-series are Wilkinson dividers and can also be used as combiners. In addition to a max. input power of 10 W these low-attenuation two-way splitters have an excellent VSWR and low insertion loss. A further advantage of our power dividers (combiners/splitters) are the exceptional amplitude and phase balance.
Data Sheet_LT2-SMA 157
Data Sheet_LT2-N 177
S-Parameters_LT2-SMA 132
S-Parameters_LT2-N 132
Figure may differ from the original.
The GPIB-RS232 interface card can be used to control various devices with an RS-232 interface via the IEC bus.
EN-SPEC-GPIB-RS232-18212-01 96
Figure may differ from the original.
Figure may differ from the original.
Figure may differ from the original.
The operating power of active components, e.g. amplifiers, will be supplied through the coaxial cable using the DC coupling module. The RF signal will be blocked. The coaxial bias tees FSW-series work for the frequency range from 50 MHz to 2 GHz and will be delivered with different connectors as standard.
These passive bias tees have a supply voltage of 12 V / 200 mA max. and are available with 50 ohms impedance as standard.
Figure may differ from the original.
An impedance matching module is used for measurement applications or for coupling modules with unequal impedance. The IAG-series works for the frequency range from 50 MHz to 2 GHz and will be delivered with N/N or BNC/BNC connectors as standard.
These passive 50 ohms impedance matches have an input power of 0.5 W CW max. and are available with other configurations on request.
Figure may differ from the original.
A coaxial DC block is used when DC isolation is required to protect sensitive RF system components like receivers or test equipment. The passive DC block DCB-554-500Hz-6GHz lets through frequencies between 500 Hz and 6 GHz and will be delivered with SMA connectors female as standard.
In addition to a low insertion loss this wideband DC block offers an excellent VSWR. By the way the DC block DCB-554-500Hz-6GHz got an RF shielded aluminium enclosure with small dimensions and inner only configuration.
Data Sheet_DCB-554-500Hz-6GHz 175
S_Parameters_DCB-554-500Hz-6GHz 122
Figure may differ from the original.
Coaxial DC blocks prevent the passing of DC current on a coaxial transmission line. The DCB-series lets through frequencies between 50 MHz and 2 GHz and will be delivered with N, BNC od TNC connectors.
Diese passiven 50 Ohm DC-Blocks haben eine Belastbarkeit von 0.5 W CW max. und sind auf Anfrage in verschiedenen Ausführungen erhältlich.
The band pass filter FIL-BP2450 is designed for operations between DC and 6000 MHz. This band pass filter lets through the signals between 2400 MHz and 2500 MHz (Wi-Fi-Band) and rejects (attenuates) frequencies outside that range up to 6000 MHz.
In addition to an input power of 2 W max. this band pass filter FIL-BP2450 got an RF shielded aluminium enclosure with N connectors. Other connectors and impedances are available on request.
Data Sheet_FIL-BP2450 279
S-Parameters_FIL-BP2450 91
Figure may differ from the original.
cable series UT, EF, Semi-Rigid or flexible Sucoform 50 Ω or 75 Ω all saleable coax connectors lengths to customers wishes
Figure may differ from the original.
The 20 dB Directional Couplers of series RK20-5xxP-6G was developed for the use in the frequency range from 700 MHz up to 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT and Wi-Fi.
Due to the multi-section stripline design very good specifications will be achieved at all ports.
The Directional Couplers have a RF-tight housing and are available with SMA or N connectors.
Data Sheet_RK20-SMA-6G 140
S-Parameters_RK20-SMA-6G 140
Figure may differ from the original.
The 15 dB Directional Couplers of series RK15-5xxP-6G was developed for the use in the frequency range from 700 MHz up to 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT and Wi-Fi.
Due to the multi-section stripline design very good specifications will be achieved at all ports.
The Directional Couplers have a RF-tight housing and are available with SMA or N connectors.
Data Sheet_RK15-SMA-6G 270
S-Parameters_RK15-SMA-6G 304
Figure may differ from the original.
The 3 dB Hybrid Couplers of series RK3-5xxP-6G was developed for the use in the frequency range from 700 MHz up to 6000 MHz and are therefore suitable for the most common mobile communication standards such as GSM, UMTS and LTE as well as Bluetooth, DECT and Wi-Fi.
Due to the multi-section stripline design very good specifications will be achieved at all ports.
The Hybrid Couplers have a RF-tight housing and are available with SMA or N connectors.
Data-Sheet_RK3-SMA-6G 258
Data Sheet_RK3-N-6G 331
S-Parameters_RK3-SMA-6G 304
S-Parameters_RK3-N-6G 304
Figure may differ from the original.
Coax relay modules of the KRM series with remote control can be used to switch various signals and represent a cheap alternative to relays switching units.
Figure may differ from the original.
Figure may differ from the original.
Figure may differ from the original.
Figure may differ from the original.
The SPDT Relay model RU2-53G40-C is used to switch various signals. It was developed to work at frequency ranges between DC and 3000 MHz.
This switch fits for most of mobile applications (GSM, DECT, UMTS, Bluetooth, etc.) and for satellite communication (L-Band).
Figure may differ from the original.
Figure may differ from the original.
Figure may differ from the original.
Figure may differ from the original.
Figure may differ from the original.
In the series DGL18 we offer fixed attenuators with SMA or N connectors. These coaxial attenuators are designed to meet specifications within a frequency range from DC to 18 GHz and are available with standard attenuation values of 3 dB, 6 dB, 10 dB, 20 dB or 30 dB. Intermediate values are possible on request!
Zwischenwerte sind auf Anfrage möglich!
Figure may differ from the original.
The high power attenuators series LDGL are non symetric attenuators. This means that it is not allowed to interchange input and output. These high power attenuators can be offered with attenuation from 1 dB to 30 dB in 1 dB steps. It is possible to have a cooling fan mounted to the attenuator block.
Figure may differ from the original.
The variable attenuators series DGV have a continously adjustable attenuation from 0.5 dB to about 20 dB. These attenuators can be used with good results in a frequency range from DC to 1000 MHz.
Figure may differ from the original.
In the series DGL18 we offer fixed attenuators with SMA or N connectors. These coaxial attenuators are designed to meet specifications within a frequency range from DC to 18 GHz and are available with standard attenuation values of 3 dB, 6 dB, 10 dB, 20 dB or 30 dB.
Intermediate values are possible on request!
Figure may differ from the original.
In the series DGL we offer fixed attenuators combined with all saleable coaxial connectors (male or female). These coaxial attenuators are designed to meet specifications within a frequency range from DC to 1000 MHz and are available with standard attenuation values of 1 dB, 3 dB, 6 dB, 10 dB, 20 dB or 30 dB. Intermediate values or higher power, etc. are possible on request!
Figure may differ from the original.
The programmable attenuator PAH-4G/95-TTL is designed for operations between 50 MHz and 4000 MHz (up to 6000 MHz on request). This digital attenuator is useable for telecom applications (e.g. GSM, DECT, UMTS, Bluetooth and all LTE frequency bands up to 4 GHz) as well as in the satellite communications (L-band) and for broadcast standards from FM.
In addition to a max. input power of +34 dBm this programmable attenuator has an excellent VSWR and low insertion loss at a low power consumption. The attenuation of this unit is adjustable continuously and without breaks from 0 to 95 dB in 0.25 / 0.5 dB steps.
The programmable attenuator can be used bidirectionally and due to the internal block capacitors no further DC voltage precautions are necessary at the RF paths.
By the way this low-loss attenuator got an RF shielded aluminium enclosure with small dimensions and is identically constructed as the attenuator PAH-8000/93-TTL.
Because of its controlling via TTL interface this bidirectional attenuator can be used very flexible and and can thereby be operated manually without software.
PAH-4G/95-TTL, Programmable Attenuator 280
S-Parameters PAH-4G/95-TTL, Programmable Attenuator 460
Figure may differ from the original.
DC – 500 MHz (frequency range) 50 Ω oder 75 Ω (impedance) BNC (RF-connectors)
DC – 18 GHz (frequency range) 50 Ω or 75 Ω (impedance) up to 100 W CW (input power) BNC, SMA, N, TNC (RF-connectors)
Figure may differ from the original.
Another example of our numerous customised shielding boxes is the model MSB-0023 with 19 inch x 12 HU, which has been developed for the rack mounting. The compact portable EMC shielded chamber is opened from the front side by the easy one-hand mechanism and offers plenty of space for specimens of all kinds.
This rack is designed for the frequency range from 700 MHz to 4200 MHz and shields electromagnetic disturbances from the environment. Besides many standard interfaces the 19 inch shielding box has two fiber optic connections and one door interlock in addition.
Figure may differ from the original.
Our shielding box MSB-0021-ABSORB is equipped with interior RF foam absorber material to achieve a greater shielding attenuation. Who needs an even better reflection selects the model MSB-0022-FERRIT which is equipped with additional ferrite absorbers.
Both shielding boxes are usable for frequencies between 700 MHz and 4200 MHz and are available from 500 MHz up to 6000 MHz on request.
Data Sheet_MSB-0021_0022 1.410
Abbildung kann vom Original abweichen.
Our standard shielding box MSB-0200 is usable for frequencies between 500 MHz and 6000 MHz. The compact and movable EMC screened ‘room’ is provided with two carrying handles and can be opened and closed by one-hand-mechanism. Furthermore the RF shielded box is equipped with different interfaces and a universal mobile phone attachment.
The delivery package of this EMC box contains one cover with built-in flexible wire mesh. Thereby the operation of the shielded housing can be done from the outside without opening the cover.
Data Sheet_MSB-0200-Stylus 587
Data Sheet_MSB-0200 666
Data Sheet_MSB-0200-Stylus-BS 670
Data Sheet_MSB-0200-2-Holder 527
Data Sheet_MSB-0253 566
Figure may differ from the original.
A larger variant of our EMC shielding housings is the model MSB-0035, which is very well suited for the frequency range from 700 MHz to 4200 MHz. Furthermore, the additional fully filtered USB 3.1 Gen 1 interface and the 10Gbit-LAN interface are a special feature of this HF box.
The stable construction of this movable screen box and the opening and closing by means of a one-hand mechanism are ideal for a high test volume.
Figure may differ from the original.
Coax relay modules of the KRM series with remote control can be used to switch various signals and represent a cheap alternative to relays switching units.
Figure may differ from the original.
Switching devices of KRE-4000 series are used in all fields of RF and EMC measurements and save the user extensive cabling.
Our relay switching unit KRE-4044-EFCI has a built-in IEEE-488 and RS-232 computer interface and switches different signals from 1 input to 12 outputs with it. The terminated SP12T relay Radiall R574403210 is front mounted and can be also switched via the integrated manual control.
Figure may differ from the original.
EN-SPEC-LE-F 397
Figure may differ from the original.
Figure may differ from the original.
The Air Interface Adapter AIAD-2/2/1xDL1+2/1 is usable for the frequency range from 700 MHz upto 2900 MHz. With this Air Interface Adapter 2 inputs will be coupled to 2 outputs through 93 dB attenuators. Besides further test connectors as well as an adjustable delay line are existing. The remote control of the Air Interface Emulator is possible via RS-232 and LAN.
EN-SPEC-AIAD-2-2-1-DL1+2-1-22113 1003
Block Diagram_AIAD-2-2_22113 66
Figure may differ from the original.
The Air Interface Adapter AIAD-7/3 is usable for the frequency range from 500 MHz upto 2900 MHz. With this Air Interface Adapter 7 inputs will be coupled to 3 outputs through 93 dB attenuators. The remote control is possible via RS-232 and LAN.
Figure may differ from the original.
The Air Interface Adapter AIAD-7/3 is usable for the frequency range from 500 MHz upto 2900 MHz. With this Air Interface Adapter 7 inputs will be coupled to 3 outputs through 93 dB attenuators. The remote control is possible via RS-232 and LAN.
Figure may differ from the original.
In the series DGL we offer fixed attenuators combined with all saleable coaxial connectors (male or female). These coaxial attenuators are designed to meet specifications within a frequency range from DC to 1000 MHz and are available with standard attenuation values of 1 dB, 3 dB, 6 dB, 10 dB, 20 dB or 30 dB. Intermediate values or higher power, etc. are possible on request!
Zwischenwerte, höhere Leistungen, usw. sind auf Anfrage möglich!
Figure may differ from the original.
